Hey makers and RC enthusiasts! This is a handy 6-pack of MG995 micro servo motors. These are standard-sized, high-torque digital servos that are super popular for all kinds of projects. Each servo weighs about 55 grams and has dimensions of roughly 40mm x 19mm x 43mm. They feature full metal gears inside, which makes them stronger and more durable than plastic-geared servos, especially under load. They have a 180-degree rotation range (90 degrees each way from center). Performance specs: At 4.8V, they have a stall torque of about 9.4 kg-cm and a speed of 0.17 seconds per 60 degrees. At 6.0V, that improves to about 11 kg-cm of torque and a faster speed of 0.13 seconds per 60 degrees. They operate on a voltage range of 4.8V to 7.2V. They come with a 300mm (about 11.8-inch) wire with a standard 3-pin connector (signal, power, ground) that's compatible with most receivers (like Futaba, Hitec, etc.) and microcontroller boards like Arduino. Use them in RC cars, trucks, boats, robots, robotic arms, camera pan-tilt mechanisms, or any project where you need precise angular control. The 6-pack is great value if you're building a multi-servo project or just want to have spares. Get creating!
