Want to install a dash cam in your Toyota or Lexus without dealing with messy wires running to the fuse box? This FitDVR power adapter is the perfect, clean solution. It taps power directly from the back of your rearview mirror! **Important:** First, check if your mirror has a 10-pin connector (you might need to pop off a plastic cover to see). If it does, you're good to go. This little device is plug-and-play – no splicing wires, so it won't void your vehicle's warranty. It takes the 12V from your mirror and gives you both a 5V USB output (for most modern dash cams) AND a 12V output (with a DC 3.5mm cable). It even comes with SIX different output cables to fit almost any dash cam model (USB-C, Micro USB, Mini USB, RJ11, and two DC cables). The cool built-in LED screen shows you the current voltage, so you know everything's working. Installation is super simple: just unplug the factory connector from the mirror, plug this adapter in between, and you're done. It provides a steady, reliable power source for your dash cam, keeping your windshield clutter-free. A must-have for a clean dash cam setup!
