This Draper straight router bit is your go-to tool for clean, chip-free cuts on laminates, Formica, and other similar man-made sheet materials. It has a 1/4-inch shank for a universal fit in most routers. The cutting edges are 10mm in diameter and 25mm long. The key feature is its 7-Tooth-Per-Inch (TPI) design with a 'downward shear' cut – this means it cuts on the downward stroke, pressing the laminate veneer down against the core material underneath instead of lifting it, which prevents ugly chipping and splintering on the top surface. It's perfect for trimming countertop edges, making inlays, or any job where you need a super clean finish on laminated boards. A must-have bit for cabinet makers, kitchen fitters, or serious DIYers working with veneered materials.
