Hey there, gearheads and DIYers! If you're upgrading your fuel system or need a reliable replacement hose, this Autoutfit 16-foot AN6 braided hose kit is a solid pick. It's made with a CPE/NBR synthetic rubber inner tubing (that's the part that actually carries the fuel or oil) and covered with a tough nylon and stainless steel braided exterior. The inner diameter is 0.34 inches (8.71mm), outer diameter is 0.56 inches (14.22mm), and it's rated for a working pressure of 500 PSI with a burst pressure up to 2000 PSI - so it can handle some serious pressure. The kit is super complete: you get the 16-foot hose, plus 4 straight swivel hose ends, 2x 45-degree ends, 2x 90-degree ends, and 2x 180-degree ends. That's everything you need to route around corners and tight spots. The hose is flexible, abrasion-resistant, and can handle oil temperatures from -40°C to 100°C, with a lifespan of about two years under normal use. The outer braid is also flame-retardant for extra safety. Autoutfit offers a 1-year warranty and stands by their quality. A quick note: professional installation is highly recommended (fuel systems are no joke!), and avoid corrosive environments to keep the hose lasting longer. If you're building a performance car, fixing a leak, or just want durable fuel/oil/cooler lines, this AN6 kit gives you great value with all the fittings included. Just contact their customer service if you have any issues - they promise to respond within 24 hours on weekdays.
