If you run a commercial embroidery machine (like Tajima, SWF, Ricoma, etc.), getting the thread tension right is everything. This pencil-style tension gauge (part #KP-19243) is the pro tool for the job. It's super simple to use: thread your machine normally, wrap the thread around the hook on the gauge, and gently pull. The sliding needle on the gauge shows you the tension in grams-force (gf), so you can see if you need to tighten or loosen the top thread. It comes with recommended tension settings for common threads — like 150gf for Rayon #40, 170gf for Polyneon or Metallic, 125gf for Polyester CR, etc. — but you can adjust up or down 5-10gf as needed for your specific project. It's compact, fits right in your tool apron, and is way more accurate than just guessing by eye. Perfect for shop owners, technicians, or serious hobbyists who want consistent, clean stitches every time. If you're not sure it'll work with your machine, just message the seller with your machine brand and model — they offer technical support. One gauge per order, does exactly what it says.
